BISTABLE SINGLE POLE BATTERY MAIN SWITCH S250 SERIES – 300A – 24V

SERIE S250

Electrical control - bistable - single pole - positive or negatice cut-off - large range available in three versions : classic, manual override, or ADR version

The S250 series, belongs to our SODEREP-ECANS bistable single pole battery switch range and it is one of the largest range of battery switches : this S250 series has been designed to prove the highest level of security for isolate a vehicle's batteries ans electrical circuit under many conditions. This S250 includes three families : the classic version, the manual override version or the ADR version. This series includes battery switches with a continuous rating of 300 A and a maximum voltage of 24V, positive or negative cut-off, protection degree level IP65 (except for the manual controls), reinforced thermoplastic design, with M10 terminals.
Some models are proposed with auxiliary circuits allowing to protect the alternator , another auxiliary circuit exists, it allows to know the state of the power circuit. The classic version is made of basic models, in which a large range of battery switches with temporization are proposed.
Some models are offering the LVM (Low Voltage Motorization), allowing to save power. Finally, some models propose a function allowing a zero consumption in OFF position. The manual override control version has several models with a large range depending on the needs : temporization, LVM or zero consumption in OFF position. These models are mainly used for the leisure marine applications and are in compliance with the ISO10133 standard.
A slave unit associated to a master unit is allowing to obtain a bipolar solution. Finally, the last version is made of a various range of battery switches compliant to the ADR regulation according to ATEX 2014/34/EU directive. These battery switches are designed for a use in explosive atmosphere, and have the ATEX marking. A slave unit can be associated with a master unit to obtain a 300 A bipolar solution

See the technical sheets View features Contact-us

Data sheets

FT01 - Electrical control - Monostable and snap action electrical control switch type - Positive battery CUT-OFF

FT02 - Electrical control by ON/OFF switch - With or without temporization - With or without auxiliary circuit - With or without connector -Silver plated copper terminals - Positive battery cut-off

FT03 - Monostable electrical control by push button and manual control (ISO10133) - Zero consumption in OFF position - Positive or ground cut off

FT04 - ATEX - Master unit (positive cut-off) or Slave unit (negative cut-off) - electrical control by ON/OFF switch - Temporization by wiring in option for the master unit

FT05 - Monostable electrical control by push button - Temporization LVM function - Positive cut-off - Auxiliary manual circuit in option (ISO 10133)

FT06 - Electrical control by push button - Ground cut off - Could be controlled by a positive Master Switch

FT07 - Electrical control by control switch - Zero consumption in OFF position - Temporization opening delay 5 seconds - Positive battery cut-off - ISO10133 approved

FT08 - Electrical control - Control signal ON-OFF - Negative Cut-Off - Opening delay

FT10 - Monostable electrical control switch - Positive or negative cut off - Safe manual control

FT11 - ATEX - Master unit (Positive cut-off) or Slave unit Negative cut-off) - electrical control by ON/OFF switch - Temporization by wiring in option for the master unit

Technical characteristics of the series

Continuous Rating

300A

Number of Poles

Single pole

Nominal Voltage (V)

12V | 24V

Polarity

Positive and negative

Conformity

ISO10133 | 94/9/CE

Protection Degree

IP65

Hole diameter

M10